Filter
Top Products
Workgroup Remote Access Switch 591
S
YSTEM
S
TATISTICS
WAN FR_IETF Statistics
WAN FR_IETF STATISTICS
You can access FR_IETF statistics by issuing the
wan fr-ietf stats [device/
fr_accessname_dlci] [prot]
console command.
Protocol
The line protocol of the packets transmitted or received.
Frames Sent
The number of frames sent for the indicated protocol.
Octets Sent
The number of octets sent for the indicated protocol.
Send Errors
The number of transmission errors for the indicated protocol.
Frames Received
The number of frames received for the indicated protocol.
Octets Received
The number of octets received for the indicated protocol.
Receive Errors
The number of errored frames received for the indicated protocol.
WAN L1P STATISTICS
You can access WAN L1P statistics by issuing the
wan l1p stats display
<slot #>
console command. These statistics are divided into the following groups of statistics:
PRI S/T (T1/E1) interface statistics, error statistics, and layer 1 general statistics. These groups are
defined below.
PRI S/T (T1/E1) INTERFACE STATISTICS
Layer 1 Up
The number of times layer 1 has reported itself up to the upper ISDN layers.
Layer 1 Down
The number of times layer 1 has reported itself down to the upper ISDN layers.
L1 Deactivates
The number of times the upper ISDN layers requested layer 1 to deactivate.
Loss of Frame (RED)
The number of times layer 1 has detected a qualified loss of frame condition; excluding AIS (alarm
indication signal).
Loss of Signal (RED)
The number of times layer 1 has detected an all zero signal (or complete lack of signal).