Filter
Top Products
Workgroup Remote Access Switch 559
S
YSTEM
C
OMMANDS
X.25 Commands
x25 a <access name>
The “a” option will set the access name specified by
<access name>
as the default access for
subsequent commands entered without an explicit access specifier. This access name will
remain the current access, until it is changed through issuing another
x25 a <access name>
command.
Note: This command may be used with all other x25 commands. For example,
x25 a acc1
vc
would be a valid command, changing the default X.25 access to “acc1”, and would
display virtual circuit information for the X.25 access named “acc1”.
x25 stats
Displays the statistics associated with the X.25 access. Refer to X.25 Statistics for a list of
available statistics and their definitions.
x25 vc <LCN>
Sets the default virtual circuit (VC) by specifying the VC’s LCN. This VC will be the default for
subsequent
vc
commands. This VC will remain the default VC, until it is changed through
issuing another
x25 vc <LCN>
command.
x25 vc active
Displays a list of all active VCs for the default X.25 access and LCN.
x25 vc clear
Clears the statistics for the default VC.
x25 vc stats
Displays the statistics for the default VC. Refer to X.25 Statistics for a list of available statistics
and their definitions.