Cabletron Systems CSX1200 Switch User Manual


 
Workgroup Remote Access Switch 179
C
ONFIGURING
O
FF
-
NODE
S
ERVER
I
NFORMATION
VRA Manager Authentication Server
VRA MANAGER AUTHENTICATION SERVER
CONFIGURING VRA MANAGER AUTHENTICATION SERVER
Notes: In order for the CyberSWITCH to reference VRA Manager for device authentication, the
following configuration steps must first be completed:
IP Routing must be enabled. If you try to enable the VRA Manager before IP routing
has been enabled, an error message will be displayed.
The appropriate LAN network interface(s) must be configured to represent the local IP
network.
The appropriate WAN network information must be configured for each type of
remote device configured that will connect to the system.
If you have configured Call Restrictions, you have configured system wide Call
Restrictions. System wide Call Restrictions will override Call Restrictions configured on
the VRA Manager on a per device basis.
U
SING CFGEDIT
1. Select Security from the main menu.
2. Select option (5), Off-node Server Information from the Security Menu. The following screen is
displayed:
3. Select VRA Manager Authentication Server from the Off-node Server Information Menu. The
following screen is displayed:
4. Enter the TCP port number used by the VRA Manager.
U
SING MANAGE MODE COMMANDS
vra
Displays the current VRA Manager configuration data.
vra change
Allows you to change the VRA Manager TCP port number.
Off-node Server Information Menu:
1) VRA Manager
2) RADIUS
3) TACACS
4) ACE
Select function from above or <RET> for previous menu: 1
VRA Manager Menu:
TCP Port Number is 2000
VRA Manager Server Options:
1) VRA Manager TCP Port
Select function from above or <RET> for previous menu: 1