Cabletron Systems CSX1200 Switch User Manual


 
Workgroup Remote Access Switch 509
R
EMOTE
M
ANAGEMENT
TFTP
TFTP
TFTP (Trivial File Transfer Protocol) is the standard way of providing file transfers between
devices. With TFTP any WAN or LAN user executing a standard TFTP client program can transfer
files to and from the CyberSWITCH. You can control access to the different file types. Statistics
concerning the file accesses are available. This feature can be used to retrieve report and statistics
files, and to perform remote node configuration.
INSTALLATION AND CONFIGURATION
TFTP is available to the user by default. No installation or configuration steps are required.
You can limit the access to files by using the
fileattr
and
tftp
commands of the Dynamic
Management feature. The
fileattr
command allows you to change the access rights for each file
type depending on access level. The tftp command provides the ability to change the TFTP Server
file access rights by assigning a user’s file accesses rights to the TFTP server. The
tftp
command
also provides the ability to disable the TFTP client component, TFTP Server component or the
whole TFTP feature.
SITE.2
Remote 1
SITE HQ
TFTP Client PC
Remote 1
ISDN
WORKGROUP REMOTE ACCESS SWITCH
LAN
10BASE-TRXTXSERVICE
CH-2
D-CH
CH-1
SYNC
POWER
LINE
1
CH-2
D-CH
CH-1
SYNC
LINE
2
CH-2
D-CH
CH-1
SYNC
LINE
3
CH-2
D-CH
AGI
CH-1
SYNC
LINE
4
WORKGROUP REMOTE ACCESS SWITCH
LAN
10BASE-TRXTXSERVICE
CH-2
D-CH
CH-1
SYNC
POWER
LINE
1
CH-2
D-CH
CH-1
SYNC
LINE
2
CH-2
D-CH
CH-1
SYNC
LINE
3
CH-2
D-CH
AGI
CH-1
SYNC
LINE
4
WORKGROUP REMOTE ACCESS SWITCH
LAN
10BASE-TRXTXSERVICE
CH-2
D-CH
CH-1
SYNC
POWER
LINE
1
CH-2
D-CH
CH-1
SYNC
LINE
2
CH-2
D-CH
CH-1
SYNC
LINE
3
CH-2
D-CH
AGI
CH-1
SYNC
LINE
4