Filter
Top Products
Printing Envelopes from the Multi-Purpose Tray
2-18
Paper Input and Output
2
NOTE
After you have loaded the envelopes into the multi-purpose tray, please check the
following items to avoid paper jams or misfeeds before printing.
- Is the stack of envelopes bending? The stack may bend if the paper guides are too
tight.
- Are the envelopes evenly stacked? If the paper guides are loose, the envelopes may
not stack evenly or feed properly.
- Is the stack straight? Do not place the stack of envelopes at an angle.
- Are the flaps of each of the envelopes separate? If the flaps of the envelopes overlap,
paper jams or misfeeds will occur.
The illustrations below show the acceptable and unacceptable arrangement of the flaps
for the envelopes in the stack.
Acceptable
The flap of each envelope should be separate, not overlapping the edges of any of the
other envelopes in the stack.
Unacceptable
If the flap of any of the envelopes overlap the edges of any of the other envelopes in the
stack, like those in the example below, paper jams or misfeeds will occur.
Examples of unacceptable overlapping flaps
or
flaps overlapping
top flap and other flaps overlapping the envelopes underneath
top flap overlaps the envelopes underneath