Filter
Top Products
5-12
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 5 Configuring Twice NAT (ASA 8.3 and Later)
Configuring Twice NAT
Configuring Dynamic PAT (Hide)
This section describes how to configure twice NAT for dynamic PAT (hide). For dynamic PAT using a
PAT pool, see the “Configuring Dynamic NAT or Dynamic PAT Using a PAT Pool” section on page 5-4
instead of using this section. For more information, see the “Dynamic PAT” section on page 3-10.
Detailed Steps
To configure dynamic PAT, perform the following steps:
Step 1 Choose Configuration > Firewall > NAT Rules, and then click Add.
If you want to add this rule to section 3 after the network object rules, then click the down arrow next to
Add, and choose Add NAT Rule After Network Object NAT Rules.
The Add NAT Rule dialog box appears.