Cisco Systems ASA 5505 Webcam User Manual


 
23-13
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 23 Configuring QoS
Monitoring QoS
Viewing QoS Shaping Statistics
To view statistics for service policies implementing the shape command, use the show service-policy
command with the shape keyword:
ciscoasa# show service-policy shape
The following is sample output for the show service-policy shape command:
ciscoasa# show service-policy shape
Interface outside
Service-policy: shape
Class-map: class-default
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
shape (average) cir 2000000, bc 8000, be 8000
The following is sample output of the show service policy shape command, which includes service
policies that include the shape command and the service-policy command that calls the hierarchical
priority policy and the related statistics:
ciscoasa# show service-policy shape
Interface outside:
Service-policy: shape
Class-map: class-default
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
shape (average) cir 2000000, bc 16000, be 16000
Service-policy: voip
Class-map: voip
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
Class-map: class-default
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
Viewing QoS Standard Priority Queue Statistics
To display the priority-queue statistics for an interface, use the show priority-queue statistics command
in privileged EXEC mode. The results show the statistics for both the best-effort (BE) queue and the
low-latency queue (LLQ). The following example shows the use of the show priority-queue statistics
command for the interface named test, and the command output.
ciscoasa# show priority-queue statistics test