Filter
Top Products
27-4
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 27 Configuring Threat Detection
Configuring Basic Threat Detection Statistics
Configuring Basic Threat Detection Statistics
This section describes how to configure basic threat detection statistics, including enabling or disabling
it and changing the default limits.
Detailed Steps
Step 1 To enable or disable basic threat detection, choose the Configuration > Firewall > Threat Detection
pane, and check the Enable Basic Threat Detection check box.
Step 2 Click Apply.
Monitoring Basic Threat Detection Statistics
To monitor basic threat detection statistics, perform the following task:
Interface overload 2000 drops/sec over the last
600 seconds.
8000 drops/sec over the last 20
second period.
1600 drops/sec over the last
3600 seconds.
6400 drops/sec over the last 120
second period.
Table 27-1 Basic Threat Detection Default Settings (continued)
Packet Drop Reason
Trigger Settings
Average Rate Burst Rate
Path Purpose
Home > Firewall Dashboard > Traffic Overview Displays basic threat detection statistics.
For a description of each event type, see the “Information About Basic
Threat Detection Statistics” section on page 27-2.