Filter
Top Products
Contents
4
Cisco ASA Series Firewall ASDM Configuration Guide
Monitoring Twice NAT 5-29
Configuration Examples for Twice NAT 5-30
Different Translation Depending on the Destination (Dynamic PAT) 5-30
Different Translation Depending on the Destination Address and Port (Dynamic PAT) 5-39
Feature History for Twice NAT 5-48
CHAPTER
6 Configuring NAT (ASA 8.2 and Earlier) 6-1
NAT Overview 6-1
Introduction to NAT 6-1
NAT in Routed Mode 6-2
NAT in Transparent Mode 6-3
NAT Control 6-4
NAT Types 6-6
Policy NAT 6-11
NAT and Same Security Level Interfaces 6-13
Order of NAT Rules Used to Match Real Addresses 6-14
Mapped Address Guidelines 6-14
DNS and NAT 6-14
Configuring NAT Control 6-16
Using Dynamic NAT 6-17
Dynamic NAT Implementation 6-17
Managing Global Pools 6-22
Configuring Dynamic NAT, PAT, or Identity NAT 6-23
Configuring Dynamic Policy NAT or PAT 6-25
Using Static NAT 6-27
Configuring Static NAT, PAT, or Identity NAT 6-28
Configuring Static Policy NAT, PAT, or Identity NAT 6-31
Using NAT Exemption 6-33
PART
3 Configuring Access Control
CHAPTER
7 Configuring Access Rules 7-1
Information About Access Rules 7-1
General Information About Rules 7-2
Information About Access Rules 7-5
Information About EtherType Rules 7-6
Licensing Requirements for Access Rules 7-7
Guidelines and Limitations 7-7