Filter
Top Products
30-23
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 30 Configuring the ASA CX Module
Managing the ASA CX Module
Examples
The following example makes GigabitEthernet 0/5 a traffic-forwarding interface:
Managing the ASA CX Module
This section includes procedures that help you manage the module.
• Resetting the Password, page 30-23
• Reloading or Resetting the Module, page 30-24
• Shutting Down the Module, page 30-25
• (ASA 5512-X through ASA 5555-X) Uninstalling a Software Module Image, page 30-26
• (ASA 5512-X through ASA 5555-X) Sessioning to the Module From the ASA, page 30-26
Resetting the Password
You can reset the module password to the default. For the user admin, the default password is
Admin123. After resetting the password, you should change it to a unique value using the module
application.
Resetting the module password causes the module to reboot. Services are not available while the module
is rebooting.
If you cannot connect to ASDM with the new password, restart ASDM and try to log in again. If you
defined a new password and still have an existing password in ASDM that is different from the new
password, clear the password cache by choosing File > Clear ASDM Password Cache, then restart
ASDM and try to log in again.