Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
A-9
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
Appendix A Cabinet and Rack Installation
Cisco MDS 9000 Family telco and EIA Shelf Bracket
Removing the Shelf Bracket Kit (Optional)
The shelf bracket kit can be removed once the Cisco MDS 9200 Series has been installed in a two-post
telco or four-post EIA rack, and the front rack-mount brackets are securely attached to the rack-mounting
rails. For additional support in an EIA rack, ensure that the C brackets on the Cisco MDS 9200 Series
are attached to the rear rack-mounting rails.
To remove the shelf bracket kit, follow these steps:
Step 1 Remove the screws fastening the slider brackets to the rear rack-mounting rails. Then, slide the slider
brackets out of the shelf brackets.
Step 2 Remove the screws fastening the crossbar to the shelf brackets and remove the crossbar.
Step 3 Remove the screws fastening the shelf brackets to the front rack-mounting rails. Then, remove the shelf
brackets from the rack.