Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
1-15
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
Chapter 1 Product Overview
Switching Modules
Figure 1-11 24-Port 4-Gbps Fibre Channel Switching Module
12-Port 4-Gbps Fibre Channel Switching Module
The 12-port 4-Gbps Fibre Channel switching module can be used in any of the Cisco MDS 9500 Series
chassis and in the Cisco MDS 9216i and 9216A Switches. The 12-port 4-Gbps switching module is a
full-rate mode module providing 12 SFP-based Fibre Channel interfaces. Each interface can support full-
line rate operation at 4 Gbps interface speed. The module delivers a sustained data rate of up to 4-Gbps
in each direction, on all ports simultaneously, and up to 96 Gbps of continuous, aggregate bandwidth
when attached to high-performance servers and storage subsystems.
Figure 1-12 shows a 12-port 4-Gbps Fibre Channel switching module. The front panel connectors are
standard modular SFP and the speed detection is autosensing.
Figure 1-12 12-Port 4-Gbps Fibre Channel Switching Module
1 Status LED 3 Fibre Channel ports
2 Link LEDs 4 Port Group
144471
2
34
1
1 Status LED 3 Link LEDs
2 Fibre Channel ports
144470
3
2
1