Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
B-14
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
Appendix B Technical Specifications
SFP and SFP+ Transceiver Specifications
Table B-22 provides the environment specification for the Cisco 4-Gbps Fibre Channel SFP transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
General Specifications for Cisco 2-Gbps Fibre Channel SFP Transceivers
Table B-23 provides general specification for the 4-Gbps Fibre Channel SFP transceiver.
Note The minimum cable distance for both the transceivers such as MMF and SMF is 2 meters (6.5 feet).
Environmental and Power Requirement for Cisco 2-Gbps Fibre Channel SFP Transceivers
Table B-24 provides the power specification for Cisco 2-Gbps Fibre Channel SFP transceivers.
Table B-22 Environmental Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
SFP
Operating Storage
Maximum Minimum Maximum Minimum
DS-SFP-FC4G-SW 40°C 0°C 85°C -40°C
DS-SFP-FC4G-MR 40°C 0°C 85°C -40°C
DS-SFP-FC4G-LW 40°C 0°C 85°C -40°C
Table B-23 General Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
SFP
Wavelength
(nanometer) Fibre Type
Core Size
(micon)
Baud Rate
(GBd)
Cable Distance
(meter)
DS-SFP-FC-2G-SW 850 MMF 62.5 1.0625 300 m (984 ft)
62.5 2.125 150 m (492 ft)
50.0 (OM2) 1.0625 500 m (1640 ft)
50.0 (OM) 2.125 300 m (984 ft)
DS-SFP-FC-2G-LW 1310 SMF 9.0 1.0625 6.2 miles (10 km)
9.0 2.125 6.2 miles (10 km)
Table B-24 Power Requirement Specification for Cisco 2-Gbps Fibre Channel SFP Transceivers
SFP
Average Transmit
Power (dBm)
Average Receive
Power (dBm)
Fiber Loss Budget
(dBm)
Maximum Minimum Maximum Minimum
DS-SFP-FC-2G-SW -1.2 -10.0 0 – 2.1
(62.5 micron),
2.62 (50 micron
-OM2)
DS-SFP-FC-2G-LW -3 -11.7 -3 – 7.8