Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
B-3
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
Appendix B Technical Specifications
Module Specifications
Table B-4 lists the specifications for the batteries on the Cisco MDS 9000 Family Caching Services
Module.
Weight of Modules
Table B-5 lists the weight for each module in the Cisco MDS 9000 Family.
Altitude, designed and tested for
operation
-200 to 10000 ft (-60 to 3000 m)
Physical Characteristics
Dimensions 1.75 x15.5 x16.5 in. (4.4 x 39.4 x 41.9 cm)
Note These are the maximum
dimensions of faceplate and board,
and include connectors on board.
Weight 8 to 11.5 lb (1.4 to 5.2 kg)
Table B-3 Cisco MDS 9200 Series Module Specifications (continued)
Description Specification
Table B-4 Caching Services Module Battery Specifications
Description Specification
Nominal voltage 9.6 V
Rated capacity Typical discharge capacity at 0.2C rate: 2100 mAh
Minimum discharge capacity at 0.2C rate: 2000 mAh
Minimum discharge capacity at 5C rate: 1800 mAh
(1V/cell discharge cut-off)
Discharge The battery is capable of continuous discharge from
(41 to 140°F (5 to +60°C) at 5C-rate
Charge From 32 to 59°F (0 to 15°C) at C/10 rate and from 59
to 104°F (15 to 40°C) at C/2-rate
Storage temperature 32 to 95°F (0 to 35°C)
Relative humidity range From 5 to 90%
Table B-5 Weight of Modules in the Cisco MDS 9000 Family
Module Weight
4/44-port 8-Gbps Host-Optimized switching module 9.75 lb (4.42 kg)
48-port 4-Gbps switching module 11.0 lb (4.99 kg)
24-port 4-Gbps switching module 7.75 lb (3.5 kg)
12-port 4-Gbps switching module 7.5 lb (3.40 kg)
4-Port 10-Gbps switching module 8.5 lb (3.86 kg)
32-port FC switching module 9 lb (4.1 kg)
16-port FC switching module 9 lb (4.1 kg)