Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
1-14
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
Chapter 1 Product Overview
Switching Modules
Figure 1-9 48-Port 4-Gbps Fibre Channel Switching Module
Figure 1-10 shows the port numbering and LEDs on the 48-port 4-Gbps Fibre Channel switching
module.
Figure 1-10 48-Port 4-Gbps Fibre Channel Switching Module LEDs
24-Port 4-Gbps Fibre Channel Switching Module
The 24-port 4-Gbps Fibre Channel switching module offers 24 autosensing 1-, 2-, and 4-Gbps Fibre
Channel ports and can be used in any of the Cisco MDS 9500 Series chassis and in the Cisco MDS 9216i
and 9216A Switches. The 24-port switching module can be configured in one of two operational modes:
shared bandwidth mode (default) and dedicated bandwidth mode.
Figure 1-11 shows a 24-port 4-Gbps Fibre Channel switching module. The front panel connectors are
standard modular SFP and the speed detection is autosensing.
144474
1 Status LED 3 Fibre Channel ports
2 Link LEDs
144809
1
2
3