Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
B-8
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
Appendix B Technical Specifications
General Specification for Cisco 10-Gbps Fibre Channel X2 Transceivers
Environmental Conditions and Power Requirement Specifications for Cisco 10-Gbps Fibre Channel
X2 Transceivers
Table B-10 provides the power requirement specifications for Cisco 10-Gbps Fibre Channel X2
transceivers.
Note DS-X2-FC10G-CX4 is not an optical module; therefore, it is not listed in Table B-10.
Table B-11 provides the environmental specifications for the Cisco 10-Gbps Fibre Channel X2
transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco 10-Gbps Ethernet X2 Transceivers
Table B-12 lists the Cisco 10-Gbps Ethernet X2 transceivers.
Table B-10 Power Requirement Specifications for Cisco 10-Gbps Fibre Channel X2 Transceivers
X2
Average Transmit
Power (dBm)
Average Receive
Power (dBm) Fiber Loss Budget (dBm)
Maximum Minimum Maximum Minimum
DS-X2-FC10G-SR -1.2 -7.3 -1.0 -9.9 2.6 (50.0 micron-OM3)
DS-X2-FC10G-LR 0.5 -8.2 0.5 -14.4 6.2
DS-X2-FC10G-ER 4.0 -4.7 -1.0 -15.8 11.1
Table B-11 Environmental Specifications for the Cisco 10- Gbps Fibre Channel X2 Transceivers
X2 Operating Storage
Maximum Minimum Maximum Minimum
DS-X2-FC10G-SR 40°C 0°C 85°C -40°C
DS-X2-FC10G-LR 40°C 0°C 85°C -40°C
DS-X2-FC10G-ER 40°C 0°C 85°C -40°C
DS-X2-FC10G-CX4 40°C 0°C 85°C -40°C
Table B-12 Cisco 10-Gbps Ethernet X2 Transceivers
Transceiver Module
Product Number Description Type
DS-X2-E10G-SR 10-Gbps Ethernet Short Reach, X2, SC Short reach