Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
vii
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
New and Changed Information
The Cisco MDS 9200 Series Hardware Installation Guide applies to Cisco MDS NX-OS Release 4.1(1b)
and earlier Cisco MDS SAN-OS releases.
Table 1 lists the new and changed features available with each supported Cisco MDS NX-OS release and
SAN-OS release for the Cisco MDS 9500 Series, with the latest release first.
Note As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases
before 4.1(1b) still apply.
Table 1 Documented Features for the Cisco MDS 9200 Series
Feature Description
Changed in
Release Where Documented
4/44-port 8-Gbps
Host-Optimized
Fibre Channel
switching module
Added 4/44-port 8-Gbps Host-Optimized
Fibre Channel switching module. The
switching module offers 48 autosensing
1-, 2-, 4- and 8-Gbps Fibre Channel ports
and can be used in any of the Cisco MDS
9500 Series chassis and in the Cisco MDS
9222i Switches, when running NX-OS
4.1(1b).
4.1(1b) Product Overview
chapter.
SFP+ Transceivers Added the SFP+ transceivers information. 4.1(1b) “Technical
Specifications”
section on page B-1
Cisco MDS Fibre
Channel
Bladeswitch
overview
Description of the Cisco MDS Fibre
Channel Bladeswitch for IBM
BladeCenter.
3.3(1a) Product Overview
chapter.
18/4-port
Multiservice
(MSM-18/4)
module
Added information on IPv6 support. 3.3(1a) The “1 8/4-Port
Multiservice Module”
section on page 1-21.
18/4-port
Multiservice
(MSM-18/4)
module
Added information on SAN extension
support.
3.3(1a) The “1 8/4-Port
Multiservice Module”
section on page 1-21.