Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
1-7
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
Chapter 1 Product Overview
Integrated Supervisor Modules
Figure 1-5 shows the Cisco MDS 9216i integrated supervisor module with an integrated 14-port Fibre
Channel and 2-port Gigabit Ethernet module.
Figure 1-5 Cisco MDS 9216i Supervisor Module with Integrated 14-Port Fibre Channel and 2-Port
Gigabit Ethernet Module
The Cisco MDS 9216i integrated supervisor module has a Pentium III class processor, 1 GB of DRAM,
and an internal CompactFlash card that provides 256 MB of storage for software images.
Cisco MDS 9216A Integrated Supervisor Module
The nonremovable Cisco MDS 9216A integrated supervisor module provides the control and
management functions for the Cisco MDS 9216A Switch, and it includes an integrated 16-port switching
module. The Cisco MDS 9216A integrated supervisor module provides multiple communication and
control paths to avoid a single point of failure.
Note For a description of the integrated 16-port switching module and its capabilities, see the “16-Port 2-Gbps
Fibre Channel Switching Module” section on page 1-18.
1 Status LED 4 Gigabit Ethernet ports
2 1-Gbps/2-Gbps Fibre Channel ports 5 Link LEDs
3 Link LEDs (under ports, on left) and Speed
LEDs (under ports, on right)
6 Asset tag
—SPEED LINK—
LINK-
—SPEEDLINK—
STATUS
1 56789
LINK— —SPEED
10 11 12 13 14234
12
LINK-
GIGABIT E THERNET
116889
1 6
2 4
3 5