Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com
B-15
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
Appendix B Technical Specifications
SFP and SFP+ Transceiver Specifications
Table B-25 provides the environmental specification for Cisco 2-Gbps Fibre Channel SFP transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP Transceivers
Table B-26 provides the maximum environmental and electrical ratings for Cisco Fibre Channel SFP
transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco Fibre Channel/Gigabit Ethernet Transceivers
Table B-27 lists the combination Fibre Channel/Gigabit Ethernet SFP transceivers.
Table B-25 Environmental Specifications for Cisco 2-Gbps Fibre Channel SFP Transceivers
SFP
Operating Storage
Maximum Minimum Maximum Minimum
DS-SFP-FC-2G-SW 40°C 0°C 85°C -40°C
DS-SFP-FC-2G-LW 40°C 0°C 85°C -40°C
Table B-26 Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP
Transceivers
Parameter
1
1. Do not operate outside the recommended operating conditions. Device reliability may be affected and damage to the
device may occur over an extended period of time.
Symbol Min. Max.
2
2. Absolute maximum ratings are those values beyond which damage to the device may occur if these limits are
exceeded for other than a short period of time.
Unit Notes
Storage temperature T
S
-40 85 °C 1
Case temperature T
C
070°C1, 2
Relative humidity RH 5 95 % 1
Table B-27 Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
Transceiver Module
Product Number Description Type
DS-SFP-FCGE-LW 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel-LW SFP,
LC
Long wavelength
DS-SFP-FCGE-SW 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel-SW SFP,
LC
Short wavelength