Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
Setting Security Features
11-3
Part Number: 228988-003 File Name: CH11.DOC
Writer: Lorise Fazio Saved Date: 08/26/96 10:03 AM 3:45 PM
You may enter up to seven alphanumeric characters for the
password. The next time you restart the computer, you will be
prompted to enter your power-on password.
IMPORTANT:
Type carefully, because the password does not
display as you type it. The password is not case sensitive.
However, you must use the same keys each time you enter the
password. For example, the numbers at the top of the keyboard are
not recognized as being the same as the numbers in the embedded
numeric keypad.
Entering the Power-On Password
To enter a power-on password, follow these steps:
1. Turn on the computer.
2. When the power-on password prompt is displayed, type your
power-on password carefully. The prompt symbol is a key.
If
you enter your password incorrectly, an incorrect password
prompt, a key with an "X" over it, is displayed.
3. Try again to enter the password. After three unsuccessful
attempts, you must turn the computer off and back on again
before you can continue.
Deleting/Changing Power-On Password
Once your power-on password has been established, you can delete
or change it using your computer keyboard. On most keyboards, the
slash mark (/) is the key character used, but the syntax for deleting/
changing the power-on password varies according to the language
of the keyboard purchased with your computer. To change your
password, type in the old password, enter the slash mark, and enter
the new password.
Each computer keyboard is designed to meet specific country
requirements. As a result, you may have to substitute another key
character. Refer to the online Compaq
Reference Guide
for more
information.
If You Forget Your Power-On Password
If you forget your power-on password, the computer must be
disassembled and the memory cleared. Contact your Compaq
authorized dealer, reseller, or service provider for assistance.