Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
8. Verify that Computer Checkup correctly detected the devices
installed.
NOTE
:
Devices from other manufacturers may not be detected or
may be reported inaccurately.
■
If the list is correct, select OK. The test option menu is
displayed again. Go to step 9.
■
If the list is incorrect, ensure that any new devices are
installed properly. If you do not find an installation problem,
call your Compaq authorized service provider.
9. Select one of the following from the test option menu:
■
Quick Check Diagnostics
Runs a quick, general test on each device with a minimal
number of prompts. If errors occur, they are displayed when
the testing is complete.
■
Automatic Diagnostics
Runs unattended, maximum testing of each device with
minimal prompts. You can choose how many times to run the
tests, to stop on errors, or to print or file a log of errors.
■
Prompted Diagnostics
Allows maximum control over the device testing process.
You can choose attended or unattended testing, decide to stop
on errors, or choose to print or file a log of errors.
10. Follow the instructions on the screen as the devices are tested.
When the testing is complete, the test option menu is displayed
again.
NOTE
:
When you run Computer Checkup, record any error
message numbers and have them available when you contact
your Compaq authorized reseller or service provider for
assistance.
11. Exit to the Configuration and Diagnostics menu.
Diagnostics
13-3
Part Number: 228988-001 File Name: CH13.DOC
Writer: Dianne Fielden Saved Date: 12/13/95 03:48 PM