Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
5-10
Managing Power
Part Number: 228988-003 File Name: CH5.DOC
Writer: Lorise Fazio Saved Date: 09/18/96 12:25 PM
Removing and Inserting Battery Packs
Removing/Inserting the Handle Battery
CAUTION: If no other battery is installed and computer is not
attached to external power, save your work, exit all applications,
turn off the computer, and disconnect external devices.
To remove the battery pack from the handle:
1. Lay the computer flat with the handle in the carry position.
2. Grasp the handle battery cap on the top and bottom and pull the
battery out of the handle.
NOTE
: For details on detaching or attaching the handle, see
Chapter 6, Working with Removable Devices.
Removing the Battery from the Handle
IMPORTANT
:
Battery components are considered environmentally
harmful. Disposal of used battery packs should comply with
country, state, province, or local regulations. Refer to Recycling
Used Battery Packs later in this chapter for more details.