Open as PDF
About Your System 11
About Your System
Accessing System Features During Startup
The following keystrokes provide access to system features during startup.
<F2> Enters the System Setup program. See "Using the System Setup
Program and UEFI Boot Manager" on page 51.
<F10> Enters System Services, which opens the Unified Server Configurator.
The Unified Server Configurator allows you to access utilities such as
embedded system diagnostics. For more information, see the Unified
Server Configurator documentation.
<F11> Enters the BIOS Boot Manager or the UEFI Boot Manager,
depending on the system's boot configuration. See "Using the System
Setup Program and UEFI Boot Manager" on page 51.
<F12> Starts PXE boot.
<Ctrl><E> Enters the Baseboard Management Controller (BMC) or
iDRAC Configuration Utility, which allows access to the
System Event Log (SEL) and configuration of remote access to
the system. For more information, see the BMC or iDRAC user
<Ctrl><R> Enters the PERC configuration utility. For more information, see the
PERC card documentation
<Ctrl><S> Enters the utility to configure NIC settings for PXE boot. For more
information, see the documentation for your integrated NIC.
book.book Page 11 Monday, August 9, 2010 3:07 PM