Dell NX200 Personal Computer User Manual


 
Installing System Components 95
Figure 3-12. Removing and Replacing a Power Supply
Installing a Power Supply
1
Open the system. See "Opening the System" on page 79.
2
Place the power supply in the chassis. Tighten the three screws to
secure the power supply to the chassis.
3
Connect all cables to the system board and drives.
4
Replace the system cover. See "Closing the System" on page 80.
1 Power supply 2 screws (3)
2
1
book.book Page 95 Monday, August 9, 2010 3:07 PM