Open as PDF
80 Installing System Components
Figure 3-5. Opening and Closing the System
Closing the System
Ensure that all internal cables are connected and folded out of the way.
Ensure that no tools or extra parts are left inside the system.
Place the bottom edge of the cover, opposite from the cover release latch,
into the slots in the system chassis. See Figure 3-5.
Lower the cover into the chassis.
Press the latch end of the cover into the chassis until the latch
locks into place.
Turn the lock on the cover release latch clockwise to the locked position.
See Figure 3-5.
1 cover release latch lock 2 cover release latch
3 system cover 4 chassis slots
book.book Page 80 Monday, August 9, 2010 3:07 PM