Open as PDF
Installing System Components 123
Disconnect all of the cables connected to the SATA backplane including
the SATA A cable, SATA B cable used for 3.5 inch hard drives, the
backplane power cable, and the data cable. See Figure 3-23.
To remove the SATA backplane, pull the blue release pin and slide the
Pull the backplane away from the front of the system until the securing
slots are free from the tabs on the chassis.
Figure 3-23. Removing and Installing a SATA Backplane
1 power cable 2 SATA A cable
3 blue release pin 4 J_planar cable
5 SATA backplane 6 hard drive
book.book Page 123 Monday, August 9, 2010 3:07 PM