Dell NX200 Personal Computer User Manual


 
About Your System 35
I1911 LCD Log Full.
Check SEL to
review all
Errors.
LCD overflow message.
A maximum of ten error
messages can be displayed
sequentially on the LCD.
The eleventh message
instructs the user to
check the SEL for details
on the events.
Check the SEL for details
on the events.
Remove AC power to the
system for 10 seconds or
clear the SEL.
I1912 SEL full.
Review &
clear log.
The SEL is full of
events and is unable to
log any more.
Check the SEL for more
information and then clear
the SEL.
W1627 Power
required
> PSU
wattage.
Check PSU and
config.
The system configuration
requires more power than
what the power supply can
provide.
Turn off power to the
system, reduce the
hardware configuration or
install higher-wattage
power supply, and then
restart the system.
W1628 Performance
degraded.
Check PSU and
system
configur-
ation.
The system configuration
requires more power than
what the power supply
can provide, but it can
boot if throttled.
Turn off power to the
system, reduce the
hardware configuration or
install higher-wattage
power supply, and then
restart the system.
NOTE: For the full name of an abbreviation or acronym used in this table, see the
Glossary at support.dell.com/manuals.
Table 1-1. LCD Status Messages
(continued)
Code Text Causes Corrective Actions
book.book Page 35 Monday, August 9, 2010 3:07 PM