Delta Electronics VFD-F Series Network Card User Manual


 
VFD-F Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
5-34
10 Over current during acceleration (ocA)
11 Over current during deceleration (ocd)
12 Over current during steady state operation (ocn)
13 Ground fault (GFF)
14 Under voltage (Lv)
15 EEPROM WRITE failure (cF1)
16 EEPROM READ failure (cF2)
17 Base Block (bb)
18 Motor over load (oL2)
19 Reserved
20 Software/password protection (codE)
21 External emergency stop (EF1)
22 Phase-Loss (PHL)
23 Low-current (Lc)
24 FbL (Feedback Loss)
25 Reserved
26 Fan Power Fault (FAnP)
27 Fan 1 Fault (FF1)
28 Fan 2 Fault (FF2)
29 Fan 3 Fault (FF3)
30 Fan 1, 2, 3 Fault (FF123)
31 Fan 1, 2 Fault (FF12)
32 Fan 1, 3 Fault (FF13)
33 Fan 2, 3 Fault (FF23)
34 Gate Drive Low Voltage Protect (Fv)
06 - 15 Parameter Reset
Factory Setting: 00
Settings
00~65535
09: Reset parameters (50Hz, 220/380)
10: Reset parameters (60Hz, 220/440)
This parameter resets all parameters to the factory setting.
06 - 16 Parameter Protection Password Input
Factory Setting: 00
Settings 00~65535