Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
93
For stacked Switch groups, select any Switch in the stack according to its number in the stack order (1 – 6) from
the drop-down Unit menu.
The read-only information that can be viewed in the Stacking Information window is as follows:
MAC Address
MAC address of the Switch
Ext. Module Type
Type of module (Extension Module) used for uplink to Ethernet
backbone
Ext. Module Version
Version number of the Extension Module
VDSL Patch File Version
Version number of the VDSL Patch File
Fan Status
Current status of system fan, Good or Fail
Note: If the master Switch is changed, connect the Ethernet uplink to the new master.
To view or change the current configuration of the Switch stack hierarchy, click Stacking Configuration to
view a new menu.
Stacking Configuration
Use the Stacking Configuration menu to change or view the order (hierarchical order) of a stacked Switch group.
Figure7- 8. Stacking Configuration Menu
To change the stack order of the Switch stack, use the drop-down menu listed under Unit to select the desired
order for this unit in the new hierarchy. Click Apply to force the new order. Remember that it is best to uplink to
the master Switch, keep this in mind should you change the master (Unit 1) Switch.
Each Switch in the stack must be restarted in order to implement the change to the stack order. Once you have
saved the new stack order configuration and rebooted all the Switches in the stack, the new logical stack order
will be displayed in the Stacking Configuration screen in the order.