Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
60
Figure 6- 23. Port 802.1X Capability Settings screen
To set up the Switch’s 802.1X port-based authentication, toggle to select the Module :< > then select which
ports are to be configured in the Configure Port from [ ] to [ ] field. Next, enable the selected ports by
toggling the 802.1X Capability field to Authenticator. Press APPLY to let your change take effect.
Figure 6- 24. Initialize Port(s) screen
This screen allows you to initialize a port or group of ports. The table also displays the current status of the
port(s) once you press START. To initialize ports, toggle to select the Module :< > then select which ports are
to be initialized in the Configure Port from [ ] to [ ] field. Highlight START and press Enter.