Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
95
Figure7- 10. Configure Port Settings Window
For ports 1 – 24, configure the ports by selecting options described below:
Select the Unit using the drop-down menu and choose ports with the From and To drop-down menus.
Use State to enable or disable the selected port(s).
DS/US Speed can use any combination of download and upload speed. Default setting is Mode 0. Mode 0 has a
DS/US Speed set to 4M/ 1M. If you select any speed except Mode 0, you can change the DS and US speed.
Speed for both DS and US may be changed to 512K, 1M, 2M, 3M,… up to 15M using the drop-down menus.
Any changes to port speed must take into account the line distance to the CPE. VDSL Settings may also require
adjustment (see 65 for VDSL Settings).
Set Rate Adapt to Default, Optimum, and Disabled with the drop-dowm menu.
Click APPLY to make the change effective.
Configure Slot Module Port
Figure7- 11. Configure Slot Module Port Window
The Configure Slot Port menu is used to configure the uplink port. Use the State drop-down menu to Enable or
Disable the slot port. Set speed/duplex in the Speed/Duplex drop-down, choose Auto, 10/Half, 10/Full, 100/Half
or 100/Full. The default setting is Auto. The Auto setting adjusts automatically according to the speed/duplex
status of the remote connection to the slot port. Flow Control settings are determined by the Speed/Duplex