D-Link DHS-3224V Switch User Manual


 
D-Link DHS-3224V Switch User’s Guide
146
B
Runtime Switching Software Default Settings
Load Mode Ethernet
Configuration update Disable
Firmware update Disable
Out-of-band baud rate 9600
RS232 mode Console
IP address 10.90.90.90
Subnet mask 255.0.0.0
Default Gateway 0.0.0.0
BootP service Disable
TFTP server IP address 0.0.0.0
Console time out 10 min
User name None
Password None
Device STP Disable
Port STP Enable
Port enable Enable
Bridge max age 20 secs
Bridge hello time 2 sec
Bridge forward delay 15 sec
Bridge priority 32768
Port STP cost 100
Port STP priority 128
Forwarding table aging time 300 secs
NWay Enable
Flow control Enable
Community string “public”, “private”
VLAN mode IEEE 802.1Q
SNMP VLAN(802.1Q) 1
Default port VID 1
Ingress rule checking Disable