Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
132
Figure7- 57. Packet Analysis window (Table)
The information is described as follows:
Time Interval
Select the desired setting between 1s and 60s, where “s” stands for seconds.
The default value is one second.
Record Number
Select number of times the Switch will be polled between 20 and 200. The
default value is 20.
64
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
65-127
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
128–255
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
256-511
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
512-1023
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
1024-1518
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
Show/Hide
Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023,
and 1024-1518 packets received.
Clear
Clicking this button clears all statistics counters on this window.
View Table
Clicking this button instructs the Switch to display a table rather than a line
graph.
View Line Chart
Clicking this button instructs the Switch to display a line graph rather than a
table.