Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
45
Logging On to The Switch Console
To log in once you have created a registered user, from the Login screen:
1. Type in your Username and press Enter.
2. Type in your Password and press Enter.
3. The main menu screen will be displayed based on your access level or privilege.
Updating or Deleting User Accounts
To update or delete a user password:
Choose User Accounts Management from the main menu. The following Setup User Accounts screen
appears:
Figure 6- 9. Setup User Accounts Screen
1. Toggle the Action:<Add> field using the space bar to choose Add, Update, or Delete.
2. Type in the Username for the user account you wish to change and enter the Old Password for
that user account.
3. You can now modify the password or the privilege level for this user account.
4. If the password is to be changed, type in the New Password you have chosen, and press Enter.
Type in the same new password in the following field to verify that you have not mistyped it.
5. If the privilege level is to be changed, toggle the Access Level:<Root> field until the appropriate
level is displayed – Root, User+ or User.
6. Highlight APPLY and press Enter to make the change effective.
7. You must enter the configuration changes into the non-volatile ram (NV-RAM) using Save
Changes from the main menu if you want the configuration to be used after a switch reboot.
Only a user with Root privileges can make changes to user accounts.