Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
54
Configure Switch Settings
Select Switch Settings menu and press Enter to access the following screen:
Figure 6- 17. Switch Settings Menu
Switch Settings
The following fields can then be set:
• MAC Address Aging Time (sec):[300 ] This field specifies the length of time a learned MAC Address will
remain in the forwarding table without being accessed (that is, how long a learned MAC Address is allowed
to remain idle). The Aging Time can be set to any value between 10 and 1,000,000 seconds.
Note: A very long Aging Time can result with the out-of-date Dynamic Entries that may
cause incorrect packet filtering/forwarding decisions. A very short aging time may cause
entries to be aged out to soon, resulting in a high percentage of received packets whose
source addresses cannot be found in the address table.
• Switch 802.1x:<Disabled > Use this to enable or disable IEEE 802.1x Port Based Access Control for the
Switch.
• VDSL Rate Adaptive:<Enabled> This must be enabled if you use the Rate Adaptive feature when you
configure port settings.
Highlight APPLY and press Enter to make the change effective.