Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
42
Root, User+ and Normal User Privileges
There are three levels of user privileges: Root and User+, and User. Some menu selections available to users
with Root privileges may not be available to those with User+ and User privileges.
The following table summarizes the Root, User+ and User privileges:
Switch Configuration Privilege
Management Root User+ User
Configuration Yes Read Only Read Only
Network Monitoring Yes Read Only Read Only
Community Strings and
Trap Stations
Yes Read Only Read Only
Update Firmware and
Configuration Files
Yes No No
System Utilities Yes Ping Only Ping Only
Factory Reset Yes No No
Reboot Switch Yes Yes No
User Accounts Management
Add/Update/Delete User
Accounts
Yes No No
View User Accounts Yes No No
Table 6-1. Root, User+, and User Privileges
After establishing a User Account with Root-level privileges, press Esc. Then highlight Save Changes and press
Enter (see below). The Switch will save any changes to its non-volatile ram and reboot. You can logon again
and are now ready to continue configuring the Switch.
Save Changes
The DHS-3224V has two levels of memory; normal RAM and non-volatile or NV-RAM. Configuration changes
are made effective by highlighting APPLY and pressing Enter. When this is done, the settings will be
immediately applied to the switching software in RAM, and will immediately take effect.
Some settings, though, require you to restart the Switch before they will take effect. Restarting the Switch erases
all settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is necessary to save all setting
changes to NV-RAM before rebooting the Switch.