Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
122
SLIP Settings
Change the following SLIP settings:
Baud Rate
Specifies the rate data will be exchanged over the serial link. The default
value is 9600 baud.
Interface Name
The name of the IP interface, previously defined on the switch, that will
communicate with the remote management station.
Local IP Address
The IP address that corresponds to the IP interface name above.
Remote IP Address
The IP address of the remote management station that will communicate
with the switch using SLIP.
MTU
Maximum Transfer Unit, specifies the maximum number of bytes (octets)
that can be transferred in a single packet. The options are 1006 and
1500.