Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
49
Switch Information
Choose Switch Information to access the first item on the Main Menu and press Enter. The following menu
appears:
Figure 6- 11. Switch Information Menu
Use the Switch Information menu to view information about any unit in the stack. Toggle Unit : < > to select
any Switch in the stack according to its number in the stack order (1 – 6), where unit number 1 is the master of
the Switch stack.
The read-only information that can be viewed in the Stacking Information Window is as follows:
MAC Address MAC address of the Switch
Ext. Module Type Type of module (Extension Module) used for uplink to Ethernet backbone
Ext. Module Version Version number of the Extension Module
VDSL Patch File Version Version number of the VDSL Patch File
Fan Status Current status of system fan, Good or Fail
Note: If the Master Switch is changed, for any further configuration, it will be necessary
to attach the serial cable to the new master after restarting the original master Switch. It
is also recommended that you connect the Ethernet uplink to the new master.
This information is helpful to keep track of updates and to obtain the Switch’s MAC address for entry into other
network device’s address table – if necessary.
To view or change the current configuration of the Switch stack hierarchy, select Stacking Configuration to
view a new menu.