Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
7
Power on
The Switch can be used with AC power supply 100-240 VAC, 50 - 60 Hz. The Switch’s power supply will
adjust to the local power source automatically. It may be powered on without having any or all network cables
connected.
After the Switch is plugged in, the LED indicators should respond as follows:
• The console LED indicator will blink green. This blinking of the LED indicators represents a reset of the
system.
• The power LED indicator will light steady green
Power Failure
As a precaution, if power failure occurs, unplug the Switch. When power is resumed, plug the Switch back in.