Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
102
Radius Server
The RADIUS feature of the switch allows you to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker. The Web Manager offers three windows.
General Radius Server
Figure7- 18. General Radius Server Setting window
This window allows you to set the following features:
AuthProtocol
Toggle between the authentication protocol options: Radius
Server(Support EAP) and Local.
Radius Dead Time
This specifies the number of minutes a RADIUS server which is not
responding to authentication requests is considered unavailable
and is passed over by further requests for RADIUS authentication.
Radius Time Out*
This specifies the number of seconds NAS waits for a reply to a
RADIUS request before transmitting the request.
Radius Maximum
Retransmit*
This specifies the number of times NAS transmits each RADIUS
request to the server before giving up.
Accounting Method
To use a RADIUS Server, toggle from None to Radius Server.
Accounting Mode
Select the desired method: Start and Stop, Stop only, or None.
*Note: The ServerTimeout value must be set to a value that is less than the Radius
Timeout and Radius Maximum Retransmit settings (see 802.1X Authenticator Settings)