Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
110
Port Ingress Filter
The following figure and table describe how to configure a Port Ingress Filter on the switch.
Figure7- 28. Port Ingress Filter Screen
Port
The number of the port for which ingress filtering is to be Enabled or Disabled.
Ingress Filter
Specifies the port to check the VID of incoming packets against its VID or PVID.
If the two are equal, the port will receive the packet. It the two are unequal, the
port will drop the packet. This is used to limit traffic to a single VLAN.