Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
138
Maintenance
This category includes TFTP Services (Update Firmware, Configuration File, Save Settings, and Save History
Log), Switch History, Ping Test, Local Loopback, Line Loopback, Save Changes, Factory Reset, Restart System.
TFTP Services
Trivial File Transfer Protocol (TFTP) services allow the Switch firmware to be upgraded by downloading a new
firmware file from a TFTP server to the Switch. A configuration file can also be loaded into the Switch, and
switch settings can be saved to a TFTP server. In addition, the Switch’s history log can be uploaded from the
Switch to a TFTP server.
Please note that TFTP server software must be running on the management station for the TFTP services listed
here to work.
Update Firmware
Figure7- 65. Update Firmware from Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of
the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s RAM (use Save
Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate the file transfer.
The information is described as follows:
Server IP Address
The IP address of the TFTP server.
File Name
The full file name (including path) of the new firmware file on the TFTP
server.
Configuration File
A configuration file can be downloaded from a TFTP server to the Switch. This file is then used by the Switch to
configure itself.
Figure7- 66. Use Configuration File on Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of
the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s RAM (use Save
Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate the file transfer.
The information is described as follows: