Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
48
Serial Port and SLIP Settings
To change the serial port settings, highlight Serial Port Settings on the Main Menu and press Enter to see the
following screen:
Figure 6- 10. Serial Port and SLIP Settings Screen
Select either the Serial Port Settings or SLIP Settings.
The following Serial Port Settings fields can then be set:
• Baud Rate - Sets the serial bit rate that will be used to communicate the next time the Switch is
restarted. Applies only when the serial port is being used for out-of-band (SLIP) management; it does not
apply when the port is used for the console port. Available speeds are 2400, 9600, 19,200 and 38,400
bits per second. The default setting is 9600.
• Data Bits – Toggle to select 7, 8
• Parity – Toggle to select None, Odd, Even
• Stop Bits - Toggle to select 1, 2
• Auto-Logout - This sets the time the interface can be idle before the switch automatically logs-out the
user. The options are 2 mins, 5 mins, 10 mins, 15 mins, or Never.