Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
139
Server IP Address
The IP address of the TFTP server.
File Name
The full file name (including path) of the new firmware file on the TFTP server.
Save Settings
The Switch’s current settings can be uploaded to a TFTP Server by the Switch’s management agent.
Figure7- 67. Save Settings To TFTP Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of
the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s RAM (use Save
Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate the file transfer.
Please note that if the user does not save configurations to NV-RAM, the configurations the user is uploading to
a TFTP server will not be saved correctly.
The information is described as follows:
Server IP Address
The IP address of the TFTP server.
File Name
The full file name (including path) of the new firmware file on the TFTP
server.
Save History Log
The Switch’s management agent can upload its history log file to a TFTP server.
Please note that an empty history file on the TFTP server must exist on the server before the Switch can upload
its history file.
Figure7- 68. Save Switch History To TFTP Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of
the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s RAM (use Save
Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate the file transfer.
The information is described as follows:
Server IP Address
The IP address of the TFTP server.
File Name
The full file name (including path) of the new firmware file on the TFTP
server.