Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
84
Ping Test
To test the connection with another network device using Ping, highlight Ping Test and press Enter.
Figure 6- 59. Ping Test Screen
Enter the IP address of the network device to be Pinged and the number of test packets to be sent (3 is usually
enough). Highlight START and press Enter to initiate the Ping program.
Local Loopback Test
To test the conduct a loopback test on the local loop, highlight Local Loopback and press Enter.
Figure 6- 60. Local Loopback Test Screen
Enter the port number to be tested and the number of repetitions for the test. Highlight START and press Enter
to initiate the Local Loopback test. Success or failure of the test will be indicted upon its completion.