Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
121
Serial Port Settings
Change serial port settings by clicking on the Serial Port Settings button to see the screen shown below. Change
the Auto-logout console settings or change the SLIP settings.
Figure7- 44. Serial Port Settings
Console Settings
The read-only console settings are:
Baud Rate
Specifies the rate data will be exchanged over the serial link. The default value is
9600 baud.
Data Bits
Specifies the number of bits that will carry data over the serial link. The default
value is 8 bits.
Stop Bits
Specifies the number of bits that indicate when a serial word ends. The default
value is 1 bit.
The Auto-logout settings can be changed. Select 2 minutes, 5 minutes, 10 minutes, 15 minutes or Never
from the drop-down menu.