Filter
Top Products
D-Link DHS-3224V Switch User’s Guide
43
To retain any configuration changes permanently, highlight Save Changes from the main menu.
Figure 6- 5. Main menu
The following screen will appear to verify that your new settings have been saved to NV-RAM:
Figure 6- 6. Save changes Screen
Once the switch configuration settings have been saved to NV-RAM, they become the default settings for the
switch. These settings will be used every time the Switch is rebooted.
Factory Reset
The only way to change the configuration stored in NV-RAM is to save a new configuration using Save
Changes, or to execute a Load Factory Default Configuration from the System Reboot menu (under Reboot
on the main menu). This will clear all settings and restore them to their initial values listed in the Appendix B.
These are the configuration settings entered at the factory and are the same settings present when the Switch was
purchased.