Emerson 710NPBA Power Supply User Manual


 
Installation Instructions IM581127000
Spec. No. 581127000 (Model 710NPBA) Issue AB, March 22, 2012
Chapter 2. Installing the System Page 11
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Installing Optional Battery Disconnect Circuit Breakers Procedure
1) To install optional battery disconnect circuit breakers onto the List 93 Battery
Tray, perform the procedure in Figure 2-5.
2) Battery tray wiring is shown in “Installing and Connecting Batteries in List 93
Battery Tray in Chapter 4. Making Electrical Connections.
Figure 2-5
Installing Optional Battery Disconnect Circuit Breakers onto a List 93 Battery Tray
Battery Disconnect
Circuit Breaker Assembly
1. Remove the cover from the battery
disconnect circuit breaker assembly.
2. Secure the battery disconnect circuit
breaker assembly to the battery tray
3. Secure the ground lead under a battery
tray relay rack mounting bolt.
4. After wiring to the battery disconnect
circuit breaker, replace the cover.
5. Repeat for the other side of the battery
tray.