Filter
Top Products
Installation Instructions IM581127000
Spec. No. 581127000 (Model 710NPBA) Issue AB, March 22, 2012
Chapter 4. Making Electrical Connections Page 71
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Load Connections to Dual Voltage Distribution Panels
List DA: +24V/-48V Distribution Panel,
(17) +24V Bullet/TPS/TLS Circuit Breaker/Fuse Positions (with Return Busbar) and
(4) –48V Bullet/TPS/TLS Circuit Breaker/Fuse Positions (with Return Busbar)
List DB: +24V/-48V Distribution Panel,
(13) +24V Bullet/TPS/TLS Circuit Breaker/Fuse Positions (with Return Busbar) and
(8) –48V Bullet/TPS/TLS Circuit Breaker/Fuse Positions (with Return Busbar)
Load
Connections
Load Return
Connections
LOAD AND LOAD RETURN CONNECTIONS
1/4-20 Studs on 5/8” Centers
(Customer must supply
or order additional
hardware)
Maximum Lug Width:
0.625 inches.
-
4
8
V
D
i
s
t
r
i
b
u
t
i
o
n
+
2
4
V
D
i
s
t
r
i
b
u
t
i
o
n
Observe proper
polarity when making
load connections.
WARNING!
Caution: A circuit breaker or fuse with a rating
of 100A or greater SHALL HAVE an empty
mounting position between it and any
other overcurrent protective device.
Load
Connections
Load Return
Connections
LOAD AND LOAD RETURN CONNECTIONS
1/4-20 Studs on 5/8” Centers
(Customer must supply
or order additional
hardware)
Maximum Lug Width:
0.625 inches.
-
4
8
V
D
i
s
t
r
i
b
u
t
i
o
n
+
2
4
V
D
i
s
t
r
i
b
u
t
i
o
n
Observe proper
polarity when making
load connections.
WARNING!
Caution: A circuit breaker or fuse with a rating
of 100Aor greater SHALL HAVE an empty
mounting position between it and any
other overcurrent protective device.