Filter
Top Products
110
Loading 4
×
× ×
×
5-inch film
Follow these steps to load 4
×
5-inch
film:
1. Place the 4
×
5-inch film guide on a
flat surface and remove the cover
from one of the film holders.
2. Insert the film in the film holder,
making sure the glossy (smooth)
side of the film faces down and the
film emulsion layer faces up. Then
close the cover.
3. Repeat steps 1 and 2 for all the film
you scan.
4. Place the 4
×
5-inch film guide
on the document table. Align it
with the notch on the
transparency guide as shown.
5. Close the TPU and begin your
scan.
If you’re using
EPSON TWAIN Pro to scan, make sure to select TPU Neg or
TPU Pos as your document source.